Monday, December 29, 2014

Tunisian Tiger

 My growing 28mm DAK army has been reinforced with a Tiger tank.  The model is from Rubicon and is part of their rapidly expanding plastics line.  It was a joy to both put together and paint and I'd rate it a 10 out of 10.  Rubicon has become one of my favorite sources for ww2 vehicles.  Trenchworx is still my favorite due to their superb quality but rubicon isn't that far behind.

 The crew figures are Perry metals and are very nice - I still have 4 left for other vehicles.

 I added a dry brush of stone grey as a last step and like the results.
 This model was entered as part of the second fortnight challenge - "Riders and Mounts" in the Analogue Hobbies Painting Challenge

Saturday, December 27, 2014

AHPCV Week 3 Reports and a DAK Army

 With the third week of the challenge conclude progress is a bit "ahead of plan".  With a total points level of 777 vs a plan goal of 609.  With real world work stuff piling up and at least 3 trips to the UK for business in the next few months, I need to crack on if I'm going to meet the goal.

I should point out my total includes 80 points for the "Cold Fortnight Submission".

 The latest challenge entry was a large one (320 points) and is a 28mm DAK army to be used for either Bolt Action or Chain of Command.  I managed to paint the entire group over a three day period - which is a blistering pace for me!

 38 infantry figures from the Perry plastic Box set.  These are superb figures and nicely balance figure pose options with ease of assembly.  There are 22 riflemen, 8 troops with SMG's, 4 light machine gunners, a 50mm mortar team, a radio operator and on officer.

The force's recon element consists of a 3 vehicle 8-Rad unit.  These are all from Warlord and are Resin hulls with metal detail parts.  To be honest, the casting quality was very poor and the hulls required a good bit of work to make paint-ready. The commander is a customized plastic figure from Warlord's first plastic german infantry set.

 The main punch of the force comes in the form of a platoon of three Panzer IIIJ's.  These are the new Rubicon plastic kits and I highly recommend them.  Lots of detail and one can build serval different version of the Panzer III.  The only complaint is that some of the deck details (tools, cables) are molded on but are very faint and a bit hard to paint.  Those details are probably true-scale but require care to bring out.

Overall, I'd rate these a 9.5 or of 10 with Rubicon now replacing Blitzkrieg as my number one source for WW2 tanks.

Like the 8-Rad's the unit's commander if a converted figure from Warlord's first German infantry set.

 Some additional scout elements in the form of two motorcycles with side cars and med machine guns.  These are metal kits from Warlord and are really nice.

Lastly, one other positive from the Rubicon kits is their large decal sheets.  I was able to do all 8 vehicles with the decals from one sheet plus a few extra crosses from a second and still have a lot left over.  One of my biggest gripes about 28mm kits is that manufactures such as Warlord, Blitzkrieg, Company B don't include decals - it's akin to a "hidden charge" as one needs to source decals separately.

The Rubicon kits have a slight cost advantage over their resin counter parts but if you factor in the decals its a significant discount.

I'll be adding some support options to the DAK force over the next few weeks (some artillery, a mortar, a heavy Machine gun and even a Pak 38 AT gun).  There are even rumors that the force may receive a Tiger!

This force will likely see the tabletop at the 2015 Cold Wars BA tournament.

Monday, December 22, 2014

Merry Christmas, Happy Holidays form the Uber Geek's Lair

 Wishing you and your families a joyous holiday season and the best hopes for a happy and healthy new year.

Holiday preparations are winding down here in St Michaels, MD which is good given the big day is 72 hours from now.  With my son home from college and my wife healthy and happy there really isn't anything more I need.

One tradition here on the Eastern Shore is for one of my neighbors to put on a rather extensive yard display and this year's a good one, especially if you like trains.

Sunday, December 21, 2014

British and French Ironclads plus a Fort

 To the left are the completed ironclads and a fort that I have submitted for the Analogue Painting Challenge.
 First up is the British Flagship - the iconic HMS Warrior.  The Warrior was a huge ship and this is a huge model in 1/600 scale - it's 10.5 inches long!  Like the Hector, the model is scratch built based using a rather poor hull casting for the basic dimensions.  One modeling tip - a dremel rotary tool is a great addition to the scratch builders tool kit.
 The Warrior is on display in Portsmouth and it's on my list of to do's during one of my frequent business trips to the UK.  Like the Hector, the Warrior is classed as a broadside frigate which means she was armored along the sides but her bow and stern were not.  Her armor was 114mm iron plate on top of 457mm of teak.  The ship's armament consisted of 36 x smoothbore 68 pounders, 10 x 110 pounders and 4 x 40 pounders - that was a lot of metal to throw in a single broadside.

 The Warrior was an extremely fast ship and was capable of sustaining 14 knots which was blazing fast for the age.  However her length and bulk limited her turning radius which could be problematic if an engagement occurred anywhere other than the open sea.

The model itself is a resin hull that's been "planked" in plastic card,  The Masts are plastic rod with greenstuff making up the furled sails.  The life boats came from my bit's box and the davits are just bent brass rod.

Overall, I'm very pleased with how she came out.  Sometimes scratch building is the only way to complete a project.  It can be very rewarding but one has to go into to it with a mindset that the first few versions will need to be redone.  Ok, in my case there might be more that a few "re-done versions"

Next up for the British is the HMS Scorpion.  The Scorpion has a very interesting history - she was laid down as the CSS North Carolina.  Unfortunately for her builders, it was illegal to sell warships to the Confederacy so they fabricated a ruse that the ship was being built for the Egyptian navy under the name "El Tousson".  During her delivery voyage to Egypt the plan was for the ship to turn to starboard rather than port near the Straights of Gibraltar and then raise the Confederate flag.  Unfortunately for the builders, the 'coppers figured out the scheme and she was seized and completed for the Royal Navy.

 The Scorpion / North Carolina was intended to be a commerce raider but she had a very low profile which made her harder to hit but also greatly reduced her sea handling capabilities.  In fact after a few years of service the Scorpion was relegated to costal defense duties, which is the nautical equivalent of a kid being kept inside the house on a sunny day to practice violin while his friends are all outside playing baseball.

The ship was armed with 4 x 9 inch guns in two rotating turrets.  The had a relatively low rate of fire but packed a real punch and had a long range.  Speed-wise she wasn't the fastest ship afloat but could make 10.5 knots on a calm day.

The model is from Thoroughbred Miniatures and is metal.  Thoroughbred makes the best 1/600 scale ironclads available.

 Next up the the CSS Columbia which served towards the end of the war in Charleston Harbor. She really didn't have a distinguished career, but in my alternative ACW scenario the ship maybe have a bit more renown....
 This model is also a metal kit from Thoroughbred, although kit might be stretching the definition as one just has to glue on the mast and smokestack and its' done!

 A group shot of the British Expeditionary Fleet as it currently stands.  I'll be adding a few more ships and some targets oops I mean transports.
 A staged "action" shot showing the British fleet taking on some US ships - the New Ironsides and the Monitor.  The picture shows just how massive the Warrior was in it's day.

All of these models will be used as part of a linked two day game I'll be putting on at Historicon in July of 2015.  The first day will feature a naval battle "somewhere along the Chesapeake" that pits a US force against a combine British / CSA fleet that's trying to force a landing to relieve a trapped Confederate army.  The outcome of the naval engagement will impact the second days game which will be a large land battle in 28mm.  If the British/CSA players are successful, the game will feature an assault by the combined CSA/ BEF on an entrenched Union army.  If they are unsuccessful during Day 1, the British army will have landed further down from the Rebels and the game will feature a Union Assault on the Confederate position with the British racing to rescue their allies.  Think Waterloo with the Union as the French, the Confederates as the British and the British as the Prussians... confusing? that's what I'm looking for.  I have found that adding an additional goal (other than winning) to a convention game does a great job in keeping everyone focused.  Oh yes, the composition of the British army during the second battle will also be influenced if any of the transports are damaged or sunk during day one.

 Speaking of the French, the game will feature a small French fleet sulking about.  Neither side will really know that fleet's intentions because, well, you know, they're French.  The flagship of the French fleet will be the Gloire.  This ship was launched in 1859 and has the distinction of being the first ocean going ironclad (much to the chagrin of the Royal Navy).  The model is yet again from Thoroughbred and is superb.
  The Gloire could reach a sustained speed of 11 knots and was armed with 36 6.5 inch muzzle loading rifled guns - ship mounted rifled cannon where not all that common in this age and gave the Gloire a distinct range advantage.

The ship also had a very unusual lattice armor structure with a layer of iron ontoo of teak followed by another layer of iron and then yet more teak.  The cumulative depth of the iron sheeting was less than her British counterparts but the armor proved to be much stronger - it could shrug off a direct hit from a British 68 pounder at a range of 20 meters.

 The last part of the overly long post is a Fort.  The casting comes from Bay Area Yards and is modeled on Fort Jackson in New Orleans. The fort is similar to both Fort Gaines and Fort Morgan which guarded the entrance to Mobile Bay and I spent many a day scrambling over both in my youth.
 Civil War forts featured fearsome guns which were more accurate than their ship board foes (because forts generally don't bob up and down with the seas).

Saturday, December 20, 2014

28MM DAK Army Started

The painting workbench has been cleared of 1/600 scale ironclads (the subject of a future post) and the next project underway is a 28mm German Afrika Korps force for either Bolt Action of Chain of Command.

The mini's are from various manufactures, which consist of (from top to bottom) Rubicon Miniatures - plastic PanzerIII's, Warlord - resin 8-Rads, Perry Brothers - 38 plastic Infantry men and Warlord again - the two motorcycles.

Some artillery support and heavy machine gun support will need to be added to the force over the holidays but what's on the table will be a good start.  With my holiday preparations pretty much complete, I'm hoping to complete this lot and submit them for the Analogue Hobbies Painting Challenge in the next two to three days.

Thursday, December 18, 2014

Interesting Day

 Today was a very interesting day.  First off, I was on a conference call in my office that was interrupted by a flock of sparrows chattering and flying into my shrubs and hitting the house.  The cause of the commotion can be see in the center of the picture if you squint - a Red Tailed Hawk came by on a "grocery" trip - he was very successful.

It was a very cool moment and the call ended up focusing on my "play-by-play" of the hunt rather than the topic at hand.

Also arriving today is my main Christmas gift - a bunch of electronics parts that will be turned into a collapsible quad copter by him over the Christmas break.  The components which include a GPS module and a video camera cost less than $200 and will be turned into something he can sell for $1,500 if he wants to (which he will not).

I remember the days when I would assemble the toys for him so he could play with them - now he just wants the parts and enjoys building them himself.

Saturday, December 13, 2014

Analogue Hobbies Painting Challenge V: Week 1 Report

 Week 1 of the Analogue Hobbies Painting Challenge V is "in-the-books" and my progress was more or line with plan with 4 submissions totaling 147 points vs a plan of 129.  Of course there was some variation is what was actually done but more on that in a later post.  The submissions themselves are a bit of an eclectic mix:

 First up is a unit of US Mobile Artillery for All Quiet on the Martian Front.  This is a really fun unit to play and the models are based on the basic Steam Tank plastics with metal parts for the gun cabin and barrel.  Both fun and easy to paint up.

 Next was a US 105mm Artillery unit from Battlefront for Flames of War (15mm).  We all can use more US artillery in that game!!

 The third submission is the HMS Hector - a 1/600 scale British Ironclad that will be used at my upcoming Historicon Game in 2015.  The model is essentially scratch built as the hull casting I purchased was really bad.  It may not be the most detailed of models but she'll do well on the table top.  The masts are plastic rod and the sails are made of greenstuff.  I went a bit oversized on the mast/spar dimensions to ensure durability when used for gaming.

The fourth and last submission of the week is a 28mm Scaled Rolls Royce Armored car from Trenchworx - this model rocks - go out and buy one!!!!

Friday, December 5, 2014

Hobby Workbench Organized

With the start of the painting challenge, a little clean up was in order of my workbench.  A few hours and two big trash bags later it's relatively organized with a 15mm unit of US 105mm artillery underway (for Flames of War)

It's unlikely for the workspace to stay this organized, but it will be nice while it lasts.

Thursday, December 4, 2014

5 Hours Until Paint-a-Gedon Commences

 Well it's roughly 5 hours until this year's Analogue Hobbies Painting Challenge V (AHPCV) commences.  In honor of this grand event I uncorked a bottle of one go my favorite Malbec's and proceeded to finish it off while cooking dinner for my lovely wife who's been delayed due to a surgery going a bit longer than she expected.

I decided to try an earn a few extra hours at the painting workbench this weekend by making dinner - a simple pasta and salad plus the wine from above.  The sauce is simple - flash fry some garlic in olive oil, add the wine and cook it down then toss in the tomatoes and some (ok a lot of) white pepper.  Let if cook for an hour of so and you look like a chef.  The key is not to burn the garlic in the oil.

We'll see how much extra paint desk time this meal earns but it couldn't hurt

Ladies and Gentlemen - Start your brushes!!!!!